Note, Av link, Connection to a decoder – Panasonic NV-HS1000EC User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections

О)

.С

■is

■w

со

Connection to a Decoder

TV Set (Not Supplied)

Aerial

у '■

llL

i»'-

t-”

Decoder (Not Supplied)

(Not Supplied)

To mains supply

Note:
If the TV set is provided with an RGB-compatible connector,
connect the 21 -pin AV cable from the VTR to this
connector. Use full-pin 21 -pin AV cables for connecting the
TV set and VTR and for connecting the VTR and decoder.

AV LINK

With this button the connected colour TV set can be
switched from TV mode to VTR mode (vice versa) when it is
connected by means of 21 -pin scart cable.

This makes a variety of functions possible, such as

simultaneous recording and viewing when a Pay TV (e.g.
Canal Plus, Filmnet) decoder or a satellite receiver has
been connected.

VTR mode (VTR indicator lights):
To enjoy sound and pictures from the VTR.

TV mode (VTR indicator goes off):
To watch another programme on the TV while recording on
the VTR.

•Select the programme to be watched using the TV set’s

tuner.

•The sound and pictures of a different channel are received

by the VTR.

■ ^ VTR-.'

TV set

Power Om

VTR mode

AV input selected

TV mode

Input from TV set’s
tuner*

Power Qft

Input from TV set’s
tuner

‘When the VTR is set to the TV mode and the Pay TV

channel is selected, the signals will still be scrambled even
when Pay TV is selected by the TV set's tuner, At a time
like this, either set the VTR to the VTR mode or switch the
TV set's input signals to AV input.