Setting for system upgrading – Panasonic CQVA70EU User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting for System Upgrading
Setting for video output type car navigation system
To use a video output type car navigation system, connect it to the VTR2 terminal. This will bring up the nav
igation screen when NAVIGATION switch is turned on without the side-brake having to be pulled. (Select
VTR2 with MODE button.)
* Set NAVIGATION switch to match the equipment connected to the VTR2 terminal as shown in the table
below.
Equipment connected to VTR2
Position of NAVIGATION switch
Car navigation system
ON
Video playback equipment, such as video deck
OFF
NAVIGATION Switch
(The NAVIGATION switch is originally set to OFF position when shipped from the factory.)
Setting for connection of a car backup camera
Use the VTR1 terminal to connect the car backup camera. When the CAMERA switch is set to the ON posi
tion and the reverse cord is connected, the camera operation will be interlocked with the reverse gear of the
car. In this arrangement, the display will change automatically to the car backup camera screen whenever
the car goes into reverse gear.
CAMERA Switch
(The CAMERA switch is originally set to OFF position when shipped from the factory.)
CQ-VA70EU
29