Operations display symbol – Panasonic NV-HD670 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

same way that you watch TV broadcasts.

If you have connected the VCR to the TV through the
video and audio input sockets, then you do not need

to follow the procedure below. Instead, simply select
the AV mode on the TV.

When the VCR is turned on after unpacking and
connecting the aerial cable and the mains lead, Plug
in Auto Tuning starts automatically.

Operations

Display Symbol

• If the VCR is turned on with the antenna not connected,

all channels are skipped. Therefore, firmly connect the
antenna and then turn the VCR off and on again to

execute Auto Tuning.

•When Auto Tuning is canceled halfway. Auto Tuning is

not executed even if the VCR is turned off and then

turned on again. In this case, see page 11 "To restart

Plug in Auto Tuning”.

Turn on the TV and VCR.

Ensure that the VCR is connected to the

aerial cable.

•Auto Tuning starts. (See next page.)

VCR/TV

Select the VCR mode.

Select the video playback channel not used

for any TV station.

H: Channel 3
L; Channel 2

On Screen Display

AUTO TUNING
IN PROGRESS,
PLEASE WAIT.

CH22 SEARCH

EKbtlilENU

(During Plug in Auto Tuning) (After Plug in Auto Tuning)

Select a programme number on the TV

which you wish to use as the video viewing

channel. Then tune in the TV to the picture
from the screen being auto tuned or the
screen selected with the and /N of the
VCR.

•During Auto Tuning, the TV programme screen does not

appear, and the Auto Tuning screen appears instead.