Panasonic G-CODE NV-FJ620 - Manual (Page 8)

1 Press the MENU button to display the Main menu on
the TV screen.
2 Press the Cursor buttons (▲ T ) 0 to select [TUNER
PRESET] then press OK button 0.
3 Press the Cursor buttons ( A ▼) 0 to select [CH] then
select the channel number you want tuned by pressing
the Cursor buttons ('^►) 0.
4 Confirm that [CLEAR] is set to [OFF].
5 Press the Cursor buttons ( A V ) 0 to select [SEARCH]
then press the Cursor buttons (*<^)0 to start the Manual
Tuning.
- If the desired TV station has not been tuned, press the
Cursor buttons ('^►) 0 again.
- Press the MENU button 0 and repeat steps 3-5 for
each programme position you want to tune to a station.
Manual Tuning Procedure
On Screen Display
^ 1
---- ' ' ■ -v
CH2 SEARCH 74
^ DQ END: MENU ^
6 Press the MENU button 0 three times to exit the On
Screen Display.
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Confirm that [CLEAR] is set to [OFF].
5 Press the Cursor buttons ( A ▼) 0 to select [SEARCH],
6 Press the Numeric buttons 0 to enter the number of the
desired programme position.
For the 5A and 9A channels, input the following numbers:
90 for CH-5A, 91 for CH-9A. (Example for NV-FJ620A.)
- For other channels that require tuning, repeat
steps 3-6.
7 Press the MENU button 0 twice to exit the On Screen
Display.
Fine Tuning Procedure
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons ( A ▼) 0 to select [FINE] then
press the Cursor buttons {◄►) 0 to obtain the best
tuning condition.
- Press the OK button 0 to return the tuning to its former
state.
Direct Tuning
5 Press the MENU button 0 to exit
the On Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons ( A ▼) 0 to select [CLEAR] then
press the Cursor buttons 0 to select [ON].
“ Repeat steps 3-4 for other unused programme
positions to skip during the selection of programme
positions.
- To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF].
5 Press the MENU button 0 twice to exit the On Screen
Display.
8