Panasonic NV-FS1 - Manual (Page 22)

USING THE VTR AS A HI-FI AUDIO RECORDER
FM Stereo Tuner
Record Player
Preparation
•Connect the VTR to the hi-fi audio system.
(Example of a connection diagram is shown).
•Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Switch on the hi-fi audio system and select an audio
source.
•For “Manual Adjustment of Audio Recording Level", see
№ 20 .
O the Input Signal Selector to “Line/Audio”.
Q For automatic adjustment of the audio recording level,
set the Audio Rec Level Control Selector to “AGC”.
Set the Audio Level Meter Selector to “Audio Level".
•To start the recording, press the Record Button (•).
o To achieve smooth transitions between adjoining
recordings, see notes on page 34.
Hi-Fi Audio Playback
►Press (for playback of both mono and stereo recordings)
the “Audio Playback Mode Selector Button" repeatedly so
that the “Left” and “Right" Audio Playback mode Indicator
light up.
►To start the playback, press the Play Button (►).
Adjustment of the Hi-Fi Audio Tracking
This adjustment may be necessary when playing back a
tape which was recorded on another hi-fi VTR.
Set the Audio Level Meter Selector to “Hi-Fi Tracking” and
slowly adjust the Tracking Control while observing the
Audio Level Meter, for highest possible meter indication.
•If the sound is impaired by high frequency distortion
when recording from an FM tuner, set the MPX
Filter switch to “On”. If there is no distortion when
recording from an FM tuner, and for all other
recordings, set this switch to “Off”.