Panasonic NV-HD70EA - Manual (Page 31)

T
Before Requesting Service
Recording will not operate correctly
SYMPTOM CAUSE REMEDY CHECKED
“ESI” indication
flashes whenever
recording is
attempted.
Erasure prevention tab on
cassette is broken off. Use tape with intact erasure prevention tab, or cover
tab hole with adhesive tape, if original recording is no
longer required.
Picture is recorded
with noise or blank
1 screen.
Aerial or aerial lead is
defective. Check aerial connection to VTR. See page 4.
Check your normal TV picture. If there is no picture,
check your aerial.
VTR is not correctly tuned. Re-tune VTR. See page 8.
Ensure input selector set to TV programme.
Timer recording
1 cannot be
performed.
Clock or calendar is
incorrectly set. .• Check clock and calendar. Set to present time.
(Note this is a 24 hour clock.) See page 6.
Recording start or end time
settings are incorrect. Set recording start and stop time correctly.
VTR is not set for timer
recording. Press TIMER REC after programming for timer !
recording.
1
f G-Code programming is not
set correctly. Check remote controller and G-Code setting. Refer to
pages 10, 11 and 21.
AV external
recordings cannot be
made.
1 Input selector is not correctly
set.
!
Select A1.
External AV connections are
incorrect.
Check that connections for external video and audio
souice are correct. See page 23.
____ ■___ . _______________________ _____
CO
c
X
5
CD
X
■ Rem ote controller will not work correctly
SYMPTOM CAUSE
1
1 REMEDY CHECKED
Remote controller
does not operate
correctly.
Remote controller transmitter
beam is not reaching VTR.
i
■ Ensure that remote controller is being pointed at VTR
■ and that transmitter beam is not obstructed.
Distance is too far. ^ Use remote controller within 7 m of VTR. If this range
, is not possible, replace batteries.
Batteries are exhausted. ; Replace batteries. Note precaution for replacement
; on page 13.
j
Batteries are incorrectly fitted
with reversed.
^ Fit batteries correctly as shown on page 13.
■ i g