Panasonic NV-HD70EA - Manual (Page 11)

Preparations forG~Code Programming
§
-C:
■*—
CO if you know the identification number of a TV station for
which a G-Code number is suppfied, you can set the TV
station by proceeding as follows:
4
3
2,5
Operations Display Symbols
1 Open the door of the remote controlier.
2 Keep CLOCK/PRESET pressed for
^ more than 2 seconds and then press it
again.
o
CLOCK; PRESET
ii n I
U IJ I
O Select the identification number
^ (001-255).
OFF ,____________
n i
7
I
U I J I
4 Select the programme position (1-42,
AD.
n n )
U U I
•To set the other TV stations, repeat steps 3 and 4.
Press CLOCK/PRESET twice.
o
]LOCK,PRESET
Close the door of the remote controller.
Note;
To .''eceive sateilite stations, the satellite receiver must be
connecteo to the VTR ana programme position must be set
depenamg on the type of the connection made.
A1: When the satellite receiver is connected to the
Audio, Video input sockets
• When the sateilite receiver ;s connected oy means of the
RF coaxial cable, set to a free programme position
between 1 and 42.