To select the desired tape speed, To interrupt recording, To record one tv programme while – Panasonic NV-HD70EA User Manual
Page 17: Viewing another programme, To display the approximate remaining, Tape time, C3)s
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-the-spot Recording
To select the Desired Tape Speed
1 Press RECORDING SP/LP to display the tape speed
indicator.
2 Keep
RECORDING SP/LP pressed for more than
2 seconds while the tape speed indicator is displayed, to
change the tape speed.
£DING
/p
C3)s
To interrupt Recording
Press
PAUSE/STILL during recording.
Press again to continue recording.
PAUSE/STILL
0
To record One TV Programme while
Viewing Another Programme
1 Refer to the on-the-spot recording operations steps 1
to 4.
2 Press
VTR/TV to select the TV mode.
3 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Press TAPE SELECT to select the corresponding
cassette tape length.
TAPE SELECT
Q
E195: For E30, -60, -80. -120, -180 and -195 tapes
E240: For E240 tape
E260: For E260 tape
2 Press DISPLAY
DISPLAY
CO
c:
.o
5
03
(§■
o
CO
cc
CQ
o
Notes;
• When a video cassette with a broken off tab :s inserted,
the
"EEI" indication will flash to indicate that recording is
not possible,
• The recording pause mode will be automatically released
after 5 minutes, and be back to the stop mode.
Clock —Counter
-Remaining Tape Time---------