Panasonic NVG40 - Manual (Page 17)

OTR Function with Immediate Start
O Select the programme position (channel) to be re­
corded,
t n
$ U
I 11
I u 0
O • ; n
J ' t u
0 Press the OTR Off (-h) or {-) Button to set the OTR
ending time to 11:00.
•When the tab of the inserted video cassette is broken
out, it will be ejected automatically.
•The “OTR" indicator will be displayed.
»When quickly and repeatedly pressing the OTR On (-i-) or
(-) Button or the OTR Off (4-) or (-) Button, the
corresponding time indication changes in
1-minute steps. When it is kept pressed, the indication
changes in 10-minute steps.
»The VTR will automatically switch off, when the OTR is
completed. To turn the VTR on again, press the VTR
On/Off Switch.
When the Check/Programme Button is pressed once, the
present time will be displayed.
When the Clock/Counter Selector Button is pressed during
OTR recording, the counter indication will be displayed.
•When the tape reaches its end during an OTR the
VTR will turn itself off.
•Make sure that the OTR Function (One-Touch
Timer Recording) does not overlap a programmed
timer recording. An OTR always takes precedence
over a timer recording.
•It is possible to change the OTR starting time or the
ending time before the recording starts.
•It is possible to perform any VTR operation (except
timer recording) until the recording starts.
•It is possible to change the OTR ending time even
during the recording.
•To interrupt an OTR, press the VTR On/Off Switch
to turn the VTR off.
•Disconnect all cables from the Video Input and
Audio Input Sockets before starting the recording. If
they remain connected, it is impossible to record TV
programmes.
-
17
-