Panasonic NVG40 - Manual (Page 14)

PLAYBACK BY USING THE REMOTE CONTROLLER
Super Fine Slow Playback
During normal playback, the Slow-motion playback can be
activated by pressing the Slow Button. The slow-motion
playback speed can then be varied by using the Slow "-H”
or Button.
When changing the slow-motion playback
speed, indicator flashes.
\
“SLOW-------- 1
£] HE] C±D
: /
;i
: \
• Press the Play Button (►) to continue the normal
playback.
•If the Slow playback operation continues for more
than 5 minutes, the VTR automatically switches over
to the stop mode.
•While playing back a tape in the Super Still or Super
Fine Slow playback mode on a TV set equipped with
an automatic vertical hold control, the picture may
shake vertically. In this case, set the TV set's vertical
hold (Auto/Manual) selector to the “Manual" position,
and adjust the vertical hold control.
Slow Tracking Control
•When noise bars appear during Super Still, Super Still
Advance or Super Fine Slow playback, switch over to slow
playback and adjust the Slow tracking Control to reduce
the noise bars.
•It may not be possible to eliminate the noise bars
completely.
Super Still Advance Playback
Press the Still Advance Button (!!►) while the VTR is in the
still playback mode. Each time you press this button, the
still-picture will advance one single field.
STILL ADV
!!►
•The sound will be played back only during normal
playback.
•If you leave the VTR in the still playback mode for
more than 5 minutes, the VTR wiil automatically
switch over to the Stop mode to protect the tape and
the video heads.
•Noise which takes the form of horizontal bars
appears on the TV in the Cue and Review playback
modes. This is not an indication of a malfunction,
•The top of the picture may become distorted in the
Cue, Review, Still or Slow mode. This is not an
indication of a malfunction.
•When the picture rolls vertically in the Cue or
Review mode, adjust the vertical hold control on the
TV set.
-
14
-