Panasonic NV-SD400 - Manual (Page 4)

Controls and Connection Sockets
This gives a detailed explanation of the function of each button, switch and connection socket.
Q Cassette Compartment
Insert a video cassette here.
o
o
N/yN
To select the required programme position (TV
station).
REC
To start a recording.
PAUSE/STILL
During playback; Still picture.
During recording; To interrupt recording.
REW (REWIND)
In the stop mode; To rewind the tape
In the playback mode; To search backward
In the rewind mode; To obtain high speed picture
is lit.
PLAY
To start playback. is lit.
For the repeat playback function.
O FF (FAST FORWARD)
I n the stop mode: To fast forward the tape
In the playback mode: To search forward
In the fast forward mode; To obtain high speed picture
">t>" is lit.
© STOP
To stop any playback or recording.
©
© POWER Ci/I
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still connected
to the mains.
© EJECT
T 0 eject a video cassette.
© Infra-red Remote Control Receiver Window
0 Display
© CVC Indicator
When the Al function is on, this indicator lights up.
© CVC (Crystal View Control)
ON: Using the Al function, playback is performed in
the state which achieves optimum picture
quality in light of characteristics of a tape.
The CVC indicator is lit.
This control should normally be left in the ON
position,
OFF: Turn off the Al function.
The CVC indicator is not lit.
With certain tapes, the OFF position may result
in a better picture.
© TIMER REC
To turn the timer recording function on and off.
□ is lit or not lit.
Once operating timer recording function, the normal
VTR operation is not possible unless this button is set
to off.