Tuning the tv to your vtr, Display symbol – Panasonic NV-SD400 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tuning the TV to your VTR

■ — RF W : , IN - OÜT

JyiDeql,

; ;

@ №i

' ’ ^U0l3

itr- RF otiT io)

1,5

it is possible to view the video picture on your TV in the

same way that you watch TV broadcasts.

H you have connected the VTR to the TV through the
video and audio input sockets then you do not need to

follow the procedure mentioned beiow. instead, simply

select AV mode on the television.

Operations

Display Symbol

Turn on the TV and VTR.

VTJVrV

Select the VTR mode.

Select the video playback channel which is
not occupied with any TV station.

NV-SD400A:

NV-SD400EA:

H: Channel 1

H: Channels

L; Channel 0

L; Channel 2

Insert a pre-recorded cassette tape and

press PLAY.

Select a programme number on the TV set
which you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the cassette tape currently playing.

NV-SD400A:

In some areas channel 0 may be used by local TV station.
In this case switch to channel 1.

Stop the playback.