M2tech – M2TECH Young DSD User Manual

Page 47

Text mode
Original mode

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER

REVISION 1.1 – march 2014

M2Tech

www.m2tech.biz

Connect the YOUNG DSD to the computer and switch it on. Then, click on the “Next”
button to proceed with installation. The window shown in Fig. 24 will appear.

Figure 24

If the DAC is correctly connected to the computer, after a few seconds the window
shown in Fig. 25a will appear. If necessary, indicate a folder of your choice, otherwise
leave the one proposed by the setup. Click on the “Install” button.