M2tech, Channels balance l <> r – M2TECH Young DSD User Manual

Page 25

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER

REVISION 1.1 – march 2014

M2Tech

www.m2tech.biz

If, at this point, the user changes his/her mind and wants to keep the current value,
it’s possible to exit the menu by pressing the front panel’s left button or by pushing
the “ESC” key on the remote control.

Following is a description of all menu items.

7.6. Balance Setting

The YOUNG DSD allows for setting the balance (that is, the relative level between left
and right channel) within a +/-6dB range in 1dB steps. To set balance it is necessary
to access the first menu item: The balance setting feature is shown as in Fig. 7.

CHANNELS
BALANCE
L <> R

Figure 7

Left channel is increased with regards to right channel by rotating the encoder
counter clockwise or by pushing the “arrow left” key on the remote control; right
channel is increased with regards to left channel by rotating the encoder clockwise or
pushing the “arrow right” key on the remote control.

To confirm or discard the newly chosen balance setting, proceed as described in
paragraph 7.5.