M2TECH Young DSD - Manual (Page 17)

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014
Copyright © 2014, M2Tech Srl
17
M2Tech
www.m2tech.biz
5. Connecting and Powering the Unit
WARNING: All connections between the YOUNG DSD
YOUNG DSD YOUNG DSD YOUNG DSD and other equipment must
be made when all units are turned off and completely powered down or
unplugged. Failing to do so may cause damage to the YOUNG DSD
YOUNG DSD YOUNG DSD YOUNG DSD and/or other
units.
Please refer to chapter 3, “Back Panel”.
Connect the digital sources (CD/SACD/DVD player, satellite receiver, DAB receiver)
to the inputs (Figure 2, 6-9).
Connect your computer to the YOUNG DSD USB input (Figure 2, 10).
If you want to use the YOUNG DSD as a preamplifier, connect the analog outputs to
the inputs of a power amplifier; otherwise connect the outputs to a pair of inputs on
an integrated amplifier or preamplifier (Figure 2, 5).
Connect the plug from the stock wall wart to the YOUNG DSD power input (Figure 2,
11).
Connect the wall wart to a mains outlet. The wall wart (AC-to-DC adapter) will
automatically accept any voltage from 90V
AC
to 265V
AC
.
Switch the YOUNG DSD on by pushing the front panel button (Figure 1, 1).
NOTE: whenever the YOUNG DSD
YOUNG DSD YOUNG DSD YOUNG DSD is used as a preamplifier, it is a good habit to
switch the power amplifier on after switching the YOUNG DSD YOUNG DSD YOUNG DSD YOUNG DSD on, and to switch
the power amplifier off before switching the YOUNG DSD YOUNG DSD YOUNG DSD YOUNG DSD off.