Industrial Injection LBZ/LMM Duramax Compound Turbo - Manual (Page 4)

12. Install new turbo on support bracket using supplied gaskets and bolts. Connect the oil drain hose ( Note:
loosen exhaust and compressor housings clamps so you can line up the pipes properly.)
13. Install New wrapped turbo pipe using stock V-band clamp and supplied bolts and exhaust gaskets. Adjust
and a line the exhaust housing and turbo pipe and ghten the 4 exhaust bolts. And then ghten stock V-
band clamp ght.
14. Install the custom intake compressor Adapter flange on the stock turbo using the factory V-band clamp and
the suppled O-ring.
15. Before installa on of the stock intake assembly cut off the cas ng stub to make room for the intake
charge pipe.
cut off