Craftsman 917.276310 - Manual (Page 15)

MAINTENANCE
MAINTENANCE SCHEDULE
FILL m DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation ✓ ✓
Check Tire Pressure ✓ ✓
Check Operator Presence and
ROS Systems ✓
Check for Loose Fasteners
✓ ✓ s ✓
Shatpen/Replace Mower Blades ✓ s
Lubrication Chart
✓ ✓
Check Battery Level ✓ 4
Clean Battery and Terminals ✓ ✓
Check Transaxfe CooNng ✓
Check V-Belts
y'
Check Engine Oil Level
✓ ✓
Change Engine Oil (with oil filter) ✓ 1.2 ✓
Change Engine Oil {without oil filter) •/'1.2 ✓
Clean Air Filter
✓ 2
Clean Air Screen ✓ 2
Inspect Muffler/Spark Arrester ✓
Replace Oil Filter {M equipped) 1^.2
Clean Engine Cooling Fins ✓ 2
Replace Spatk Plug ✓ ✓
Replace Air Filter Paper Cartridge
✓ 2
Replace Fuei Filter
1 - Chang© more often when operating under a heavy load or
in high ambient temperatures.
2 * Servio© more often when operating In dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
3 - RepJao© blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenaiioe-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-lbs. maximum.
Do not overtighten.
LUBRICATION CHART
(D Spindle
Zerk
©Front Wheel
Bearing zerk
® Steering
Sector Gear
Teeth
iC-( r =====I===™I=J1 '
spindle
Zerk
''©Front
Wheel
Bearing zerk
Engine
@ Mandrel
Zerks
© Check/Add
Transaxle
Fluid
©SAE 30 or 10w30 Motor Oil
©General Purpose Grease
©Refer to Maintenance “ENGINE"
tion
Sec-
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow­
dered graphite type lubricant sparingly.
15