ITC Hemochron Response Whole Blood Coagulation System - Manual (Page 16)

16
Appending User Notes
User Notes can be tagged to a test result to denote additional information. When a note is appended, the
numeral corresponding to that note is displayed on the screen and in the RxDx case report. The full note is
stored in the general Response database.
Note: Refer to the HEMOCHRON Response Operator's Manual for instructions to define a note.
1.
Display the RxDx System screen.
2.
Press 7 to display the notes screen:
3.
Press NO until the desired note is displayed.
4.
Press YES to select the note.
5.
Repeat Steps 3 and 4 to select additional notes. Only the last two entered note numbers will be
stored with the test result.
6.
Press YES to enter the notes into the case.
Exiting RxDx
1.
Press the CANCEL key until the Exiting RxDx screen is displayed:
2.
Press YES to exit RxDx.
Note: The Exiting RxDx screen is also displayed with an option to abort the non-RxDx test if a
non-RxDx test tube (e.g., APTT) is run while RxDx is active. Press 1 to abort the non-RxDx test
or press YES to exit RxDx. All QC lockout conditions are reactivated upon exiting RxDx.