Great Plains 3PYP Steering Kit - Manual (Page 2)

2 Great Plains Manufacturing, Inc. Front Page Part Lists 3PYP Steering
401-776M Front Page Part Lists 01/24/2011
Pre-Assembly Preparation
Tools Required
• suitable tractor for raising implement
• basic hand tools
• 2 lb. hammer
• pry bars for steering arm weldment removal
• tie rod removing tool or pickle fork
• magnetic drill with
3 ⁄
16
in,
7 ⁄
16
in,
39 ⁄
64
in,
25 ⁄
32
in size drill
bits
• center punch tool
• sander
• acetylene torch, welding visor and gloves
• C-clamp
• one can of Zep Lubeze Drill Chill cutting oil aerosol
• one can of anti-seize lubricant
• white marking pen
• Great Plains green spray paint (p/n 821-001C)
• fire extinguisher
Schema (with new parts shown)
Work Location
1. Move the implement to a location with:
Prepare Implement
2. Raise implement with tractor.
3. Secure for safety.
Crushing and Sharp Object Hazards:
Be careful working under raised implement.
• flat, smooth non-flammable surface free of com-
bustibles
• adequate illumination
• clear surface beneath for recovery of any falling or
dropped parts
Null4:
Figure 2
Schema 31895
U
D
F
B
L
R