Great Plains 3PYP Steering Kit - Manual (Page 10)

10 Great Plains Manufacturing, Inc. Front Page Part Lists 3PYP Steering
401-776M Front Page Part Lists 01/24/2011
Drill Holes in Right and Left Caster Arm Weldments
Refer to Figure 15
23. Remove template.
24. Use caster arm to support magnetic drill and drill
three holes at center punch marks.
Note: The three holes should be
25 ⁄
32
in size when fin-
ished. Take out metal in increments by using grad-
ually bigger drill bit sizes:
3 ⁄
16
in,
7 ⁄
16
in,
39 ⁄
64
in, and
finally
25 ⁄
32
in.
Note: Spray Lubeze Drill Chill on drill bits as needed to
keep bits cooled.
Null4:
Refer to Figure 16
25. Clean off all metal shavings.
Null4:
Figure 15
Use Caster Arm to Support Drill
31909
Null4:
Figure 16
Placement of 3 Holes for Mounting
New Steering Arm Weldment
31911