Great Plains 3PYP Steering Kit - Manual (Page 14)

14 Great Plains Manufacturing, Inc. Front Page Part Lists 3PYP Steering
401-776M Front Page Part Lists 01/24/2011
Install New Tie Rods
Refer to Figure 22
31. Measure old tie rod
length.
32. Adjust new tie rod to equal length of old tie rod.
411-774D TIEROD 27.75 X 2 THD LH/RH
Null4:
Refer to Figure 23
33. Mount one of the new tie rod ends in top of caster
weldment hole.
34. Secure on the bottom with new castle nut provided
with kit (not visible in photo). After length is set as
described in Step 38, secure with cotter pins.
805-096C PIN COTTER 1/8 X 1 3/4 PLT
803-056C NUT HEX SLOTTED 5/8-11 PLT GR5
Null4:
Figure 22
Measure Tie Rods
31910
16
52
52
16
16
Null4:
Figure 23
Mount New Tie Rod in Caster Arm
31915
16
61
60