4 date set, 6 time set, 1 screen saver – AJA Ki Pro Rack User Manual
Page 60: 4 date set 55.6 time set 70.1 screen saver
Ki Pro Rack v4.2
www.aja.com
60
NOTE:
If authentication is used, it provides a minimum security safeguard against unauthorized use
of the Ki Pro Rack in a networked environment. You should not consider it a substitute for
proper network security measures.
55.4 DATE SET
This parameter manually sets the calendar date of the internal Ki Pro Rack clock. The
value is defined as YYYY/MM/DD (year/month/day). These are the available options:
55.6 TIME SET
This parameter manually sets the time of the internal Ki Pro Rack clock, when setting
manually (NTP not used). These are the available options:
70.1 SCREEN SAVER
When set to “AJA Logo”, a rolling AJA logo screen saver will appear on the alphanumeric
display after 3 minutes of inactivity—defined as no button presses on the front panel.
When the Screen saver is on, the STATUS button or STOP button will exit the screen saver.
These are the available options:
Disabled (default)
Login
Disables the requirement for a login password when
accessing the device via the web UI.
Login is required via the web UI before changes can be made
to the Ki Pro Rack configuration.
variable
Using the adjust buttons, enter a calendar date for Ki Pro
Rack. Using the adjust buttons and the top SELECT button,
select the characters for each category (YYYY/MM/DD). The
adjust buttons scroll through the choices and the top
SELECT button advances to the next character. While
selecting characters, the character being changed will flash
to show its position. When finished, the final press of the
SELECT up button will flash the whole value. Press SELECT
once more to confirm and the next menu parameter will
appear.
variable
Using the Adjust buttons, enter a time for Ki Pro Rack’s clock.
Using the Adjust buttons and the top Select button, select
the characters for each digit (hours/minutes). The Adjust
buttons scroll through the choices and the top Select
button advances to the next character. While selecting
characters, the character being changed will flash to show
its position. When finished, the final press of the SELECT up
button will flash the whole value. Press SELECT once more
to confirm and the next menu parameter will appear. Time
is set using a 24-hour format (military) and must be set to
GMT time.
NOTE: There are many websites that will assist you in
converting your local regional time to GMT (UTC). AJA does
not endorse any particular one, but here are two examples:
ON (AJA LOGO (default)
SYSTEM NAME
OFF
Display horizontally rolling AJA logo after 3 minutes of button
inactivity
Display the Ki Pro Rack system name (parameter 50.5).
Screen saver is disabled.