Wood’s Powr-Grip MRTALP6FS10TDC - Manual (Page 4)

Rev 2.0/5-14 2 CF13CEO: #35178AFT
WARNINGS
Powr-Grip is pleased to offer the most reliable materials handling products available.
Despite the high degree of security provided by the Pad Frame T-Arm Assemblies,
certain precautions must be observed to protect the user and others.
Always wear personal protective equipment that is appropriate for the material being handled.
Follow trade association guidelines.
Always use the T-arm assemblies under conditions approved for the design of the vacuum lifter
(see lifter's instruction manual).
Never use T-arm assemblies that are damaged, malfunctioning, or missing parts.
Never use T-arm assemblies if the sealing ring of any vacuum pad is cut or otherwise damaged.
Never remove or obscure warning labels on the T-arm assemblies.
Never use T-arm assemblies if the Load Capacity or any warning appears to be missing or
obscured.
Always make certain the contact surfaces of the load and all vacuum pads are clean prior to
applying the pads (see lifter's instruction manual).
Never exceed the Adjusted Maximum Load Capacity or attempt to lift loads the T-arm
assemblies are not designed for (see SPECIFICATIONS and OPERATION).
Always position the vacuum pads correctly on the load prior to lifting (see OPERATION).
Always remember that modifications to T-arm assemblies may compromise your safety. Wood's
Powr-Grip cannot be responsible for products that have been modified by the customer. For
consultation, contact Wood's Powr-Grip (see LIMITED WARRANTY).