IPitomy IP400 User Guide - Manual (Page 7)

Introduction
3
Rear Panel
Figure 2: Rear Panel
Power Connect the supplied power adapter here.
Reset Button This button has two (2) functions:
• Reboot. When pressed for less than 6 seconds and
released, the VoIP Gateway will reboot (restart).
• Clear All Data. When press for 6 seconds longer
then released. ALL data are cleared and restored to
the factory default values, and the VoIP Gateway
will reboot.
LAN
(10/100BaseT) Connect to a broadband router using a standard LAN
cable.
Line 1~4 Connect to your PSTN phone lines or PBX extension
lines here.