IPitomy IP400 User Guide - Manual (Page 15)

Setup
7
Basic Setup Screen
After logging in, you will see the Basic Setup screen. This screen allows you to setup the
network configuration.
Figure 4: Basic Setup Screen
Data - Basic Setup Screen
Network Setup
Dynamic IP
address If selected, the VoIP Gateway will obtain its IP address and related
information from a DHCP Server. Select this option only if your LAN
has a DHCP Server.
Fixed IP address If selected, you must assign the following data to the VoIP Gateway.
• IP Address - The IP Address of this device. Enter an unused IP
address from the address range on your LAN. The default value is
192.168.0.250
• IP Subnet Mask - The Network Mask associated with the IP
Address above. Enter the value used by other devices on your
LAN. The default value 255.255.255.0
• Gateway IP Address - The IP Address associated with the IP
Address above. The default value is 192.168.0.1
Domain Name Server (DNS) Address
Primary DNS Enter the IP address in the Primary DNS (Domain Name Server) field.
Secondary DNS The Secondary DNS will be used only if the primary DNS is unavail-
able.
NTP
NTP Server Enter the IP address or host name for the desired NTP server.
Time Zone Choose the Time Zone for your location from the drop-down list.