IOGear GCE616U User Manual
Page 11

4
5
7
6
4
11
4. Plug one end of the Cat5e cable into Local Unit’s Sub / Main ports. Plug the other end of
the Cat 5e cable into the Sub / Main ports of the Remote Unit.
5. Connect one of the power adapters (supplied with this package with the Local Unit’s Power
Jack.)
6. Plug the remote console devices (mouse, keyboard, monitor, speakers, microphone), into
the corresponding ports on the Console side of the Remote Unit.
7. Connect the second power adapter (supplied with this package) with the Remote Unit’s
Power Jack.
Cat5e Cables
Note: The serial port on the Local Unit connects to the computer; the serial port on the
Remote Unit connects to a serial device (optional).
This manual is related to the following products: