Konica Minolta BIZHUB C360 - Manual (Page 23)

bizhub C360/C280/C220 2-11
2.2 Main Body 2
Adjusting the angle of the Control Panel
You can adjust the angle of the Control Panel of this machine among three levels. You can also tilt the Con-
trol Panel to the left. Set it to your desired angle.
NOTICE
When tilting the Control Panel, do not grab the Touch Panel.
1
Pull the Control Panel Release Lever toward you, and then pull
the Control Panel up or down.
You can tilt the angle of the Control Panel to one of the three po-
sitions.
2
To tilt the Control Panel to the left or right, hold the bottom of the
Control Panel, and then tilt the panel to the left or right.