Konica Minolta BIZHUB C360 - Manual (Page 175)

bizhub C360/C280/C220 7-38
7.6 [Copier Settings] 7
7.6 [Copier Settings]
Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö [Administrator Settings] ö [Copier Settings].
Settings
[Auto Zoom (Platen)] Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed on the Original Glass.
[Auto Zoom (ADF)] Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed in the ADF.
[Specify Default Tray when
APS Off] Configure which paper tray to be selected when the APS (Auto Paper) set-
ting is canceled.
[Tray Before APS ON] Uses the paper tray specified before the APS was
selected.
[Default Tray] Uses Tray 1.
[Select Tray for Insert
Sheet] Configure the default paper tray loaded with paper for the cover pages
(front cover), inserted sheets and the chapter title pages.
[Print Jobs During Copy
Operation] Configure whether to accept print data or fax data while a copy operation
is being performed.
[Accept] Accepts print data or fax data to print.
[Receive Only] Prints print data or fax data after the copy opera-
tion is finished.
[Automatic Image Rotation] When the original orientation is different from paper orientation, the image
is rotated depending on the setting. Configure when the image is automat-
ically rotated.
[Card Shot Settings] Register card copy setting.
If [Card Shot] is selected in [Application], the function can be invoked with
the registered setting.
[Layout] Specify where to place the front and back sides
of a card.
[Zoom] Specify to copy a card with the full size or enlarge
an image to fit paper.
[Store Original Size] Change and register the pre-specified original
size or [Original Name].
Factory default
[Auto Zoom (Platen)] [OFF]
[Auto Zoom (ADF)] [ON]
[Specify Default Tray when
APS Off] [Tray Before APS ON]