Konica Minolta BIZHUB C360 - Manual (Page 106)

bizhub C360/C280/C220 5-49
5.4 [Application] 5
d
Reference
To delete a registered stamp:
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings] ö [De-
lete Registered Stamp].
[Copy Guard]
This function prints a document, embedding a Copy Guard pattern in a copy protect text, for example, a pre-
set stamp such as Private or date.
If an attempt is made to copy copy-guarded sheets, the machine that supports this function scans a Copy
Guard pattern, stops copying, and discards the currently running job.
0 For a text, specify the desired one from [Preset Stamp] that is registered in advance.
0 A copy guard is printed on all pages. The page to start with cannot be specified.
0 The selected copy guards appear in the order they are placed, and can be used in combination for up
to six text lines.
0 [Preset Stamp], [Date/Time], and [Other] can be selected together.
0 In [Preset Stamp], multiple copy guards cannot be selected.
0 A copy guard cannot be printed on a colored paper, envelope, or transparency film.
%
Press [Application] ö [Stamp/Composition] ö [Copy Security] ö [Copy Guard].
[Position] The angle can be changed when there are no more than four lines in the se-
lected copy protection text.
[Change Pos./Delete] Change the arrangement order. Select the target
copy protection text and press [Up] or [Down].
To add a space to the copy protection text, press
[Insert Space]. Press either [Up] or [Down] to move
o that appears beside the specified copy protec-
tion text type, and then press [Insert].
To delete the copy protection text, press [Delete],
and then press the button for the copy protection
text to be deleted.
Settings
ABCD Draf
t
Draft
Dra
ft
Dr
af
aft
Draft
Dra
ft
Draft
raf
t
Dra
ft
Dra
ft
ABCD
NG