Kramer Electronics VS-88FO - Manual (Page 26)

VS-88FO - Operating the VS-88FO 23
6.1.3 Toggling Between Modes
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the TAKE button to toggle from the AT ONCE mode (in which the
TAKE button is not lit) to the CONFIRM mode (in which the TAKE button
illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the CONFIRM mode back
to the AT ONCE mode.
TAKE button turns off and actions no longer require user confirmation.
6.1.4 Switching in the AT ONCE Mode
To switch an input to an output in the AT ONCE mode, do the following:
1. Press an OUT SELECT button from 1 to 8 or the ALL button.
The 7-segment display flashes.
2. Press an IN SELECT button from 1 to 8 or the OFF button for immediate
switching.
The selected input switches to the selected output. The digits displayed in
the 7-segment display the appropriate change.
6.1.5 Switching in the CONFIRM Mode
To switch in the CONFIRM mode, when the TAKE button is illuminated, do
the following:
1. Press an OUT-IN combination.
The 7-segment display flashes. (The timeout lasts for 10 seconds).
2. Press the TAKE button to confirm the action.
The 7-segment display stops flashing. The TAKE button stays lit.
To confirm several actions (in CONFIRM mode), do the following:
1. Press each OUT-IN combination in sequence.
The 7-segment display flashes.