Kramer Electronics VS-88FO - Manual (Page 23)

20 VS-88FO - Connecting the VS-88FO
Figure 11: Connect Screen
3. Connect a USB cable from a USB port on the PC to the USB port on the
VS-88FO. (You can also connect to the PC using the Ethernet or a serial
connector).
4. Check USB as the connection method and select the COM port from the
USB drop down list.
5. Click Connect.
The K-UPLOAD screen appears as in Figure 12 .
Figure 12: Device Properties Screen
6. If required, make changes and click Save. If not, click Exit.