Power Soak 27173 Chemical Dispenser Installation Guide - Manual (Page 5)

5
To determine the correct timer setting, measure the depth of the Power Soak
unit (from the front edge to the back edge). Then, measure the Wash Tank
from the left side to the right side. Use the following information to set the
DIP switches on the timer:
34" deep unit - Liquid Storm Timer Settings for PS-200 Wash Tank
Tank
Length
(inches)
Tank
Volume
(gallons)
Liquid
Storm
(ounces)
Pump
Time
(seconds)
DIP Switch Settings
(ON)
30 59.7 5.74 69 64, 4, 1
36 71.7 6.88 83 64, 16, 2, 1
42 83.6 8.03 96 64, 32, 1
48 95.6 9.18 110 64, 32, 8, 4, 2, 1
54 107.5 10.32 124 64, 32, 16, 8, 4
60 119.5 11.47 138 128, 8, 1
66 131.4 12.62 151 128, 16, 4, 2, 1
72 143.4 13.76 165 128, 32, 4, 1
Pump Timer Settings for Wash Tank ( Liquid Storm ),
cont’d
30" deep unit - Liquid Storm Timer Settings for PS-200 Wash Tank
Tank
Length
(inches)
Tank
Volume
(gallons)
Liquid
Storm
(ounces)
Pump
Time
(seconds)
DIP Switch Settings
(ON)
30 51.4 4.94 59 32, 16, 8, 2, 1
36 61.7 5.92 71 64, 4, 2, 1
42 72.0 6.91 83 64, 16, 2, 1
48 82.3 7.90 95 64, 16, 8, 4, 2, 1
54 92.6 8.89 107 64, 32, 8, 2, 1
60 102.9 9.87 118 64, 32, 16, 4, 2
66 113.1 10.86 130 128, 2
72 123.4 11.85 142 128, 8, 4, 2