ACTiSYS PP2-5600 User Manual
Page 14
Infrared Modem User’s Manual
Page 14 of
41
Revision 1.0
2003/11 From 3JTech
(4) Internet Explorer settings
1. Tap on the Start menu and select Internet Explorer.
2. Enter the WWW address and tap on OK
(5) Mail settings
1. Tap on the Start menu and select Inbox.
2. Tap on Services below windows.
3. Choose New Service.
4. Enter your Service type (POP3 Mail) and choose Next.
5. Choose Connection to the modem that you just setting.
Enter
your
POP3 mail server under Server block.
Enter
your
User ID and Password. Then tap on Next.
6. Enter your SMTP mail server.
Enter
your
Return address. And choose Next.
7. Tap on Next if you don’t want change setting.
8. Tap on Finish if you don’t want change setting.
9. Choose OK to finish mail settings.
10. Tap on New to stat edit a new .mail.
Once connection with your ISP or remote server is established, you may use your
Internet or communication software. Tap on disconnect to terminate your dial-up
session once you are done and remember to turn off your modem.