AGFA TM 14ADV - Manual (Page 63)

3-10 User’s Manual
Selecting Paper Tray, MFF, or Manual Paper Feed ( )
Pressing puts the printer in tray select mode which allows
you to select paper sources to be used. The paper sources are tray 1, tray 2
(if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches it for another one. When
the manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates READY with the
ONLINE and DATA indicators off.
2. Press the button briefly.
The message changes to TRAY TRAY1* . The asterisk means that
tray 1 is selected.
3. Select or deselect a paper source.
This step is valid when tray 2 (option) or MFF (standard) is installed.
Pressing the
button in this condition makes the asterisk
disappear. Tray 1 is deselected. Pressing the button again
makes the asterisk reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the or buttons briefly to display another paper source. Use
the
button in the same way as described above.
5. Save the selections.
Press button to save the new settings and return to the
ready state.
Control Panel Functions
READY MANUALFEED OFF* TRAY TRAY1*
MANUALFEED ON TRAY TRAY2
TRAY MFF
or
05 Chapter 3 07.08.1997, 11:40 Uhr 10