AGFA TM 14ADV - Manual (Page 37)

1-22 User’s Manual
Notice:
If you encounter conflicts with other already installed external drivers
that use bidirectional communication on the Centronics port or with
drivers of other dedicated Windows printers used in parallel with this
printer (conflicts like the failure to establish communication between the
Printer Driver and the printer), remove these from Windows and
reinstall the PrintPartner 14ADV Printer Driver.
Standard Printer Driver for Windows 3.1/3.11
To install the Windows 3.1/3.11 Printer Standard Driver, follow these
steps:
1. Start Windows.
2. Insert the PrintPartner 14ADV Printer Driver disk into the 3.5 inch
floppy disk drive of your computer.
3. From the Windows Program Manager, select the "File" menu and
choose the "Run" command.
4. Type “A:\inst_xxx” or “B:\inst_xxx” and press the "Enter" key.
FPS Printer Driver for Windows 3.1/3.11
This printer driver is not contained in the attached floppy disks. Select a
printer driver corresponding to LaserWriter II NTX.
Standard Printer Driver for Windows 95
The Windows printer driver can be installed by either of the following
two methods. The first one applies when Windows 95 is started with the
printer ready and the second one applies when the printer is on after
Windows 95 has been started.
Installing the Printer Driver
☞
04 Chapter 1 07.08.1997, 11:39 Uhr 22