AccuTemp EVOLUTION GAS STEAMER - Manual (Page 15)

MP4010-1003 EVOLUTION GAS STEAMER
9
ELECTRICAL REQUIREMENTS
The electrical voltage requirement is listed on the data plate that is located on the lower left side
panel. All AccuTemp Evolution Gas Steamers are supplied with a power cord and plug that must be
connected to a standard a 15A (120V) or 20A (240V) grounded receptacle. Make sure the voltage
is within 10% of the voltage listed on the steamer data plate. Connection to any other voltage not
identified on the data plate will cause damage to the components and is not covered under warranty.
GROUNDING INSTRUCTIONS
Grounding provides a path for electric current to reduce risk of shock. This product is equipped with
a power cord having a grounding plug. The plug must be plugged into a receptacle that is properly
installed and grounded in accordance with all National, State and local electrical codes or in the
absence of local electrical codes with the National Electric Code, ANSI/NFPA 70, or the Canadian
Code, CSA C22.2 as applicable. Under no circumstances shall the plugs grounding prong be cut or
bent to fit a receptacle other than the one specified. Do not use any adapters.
WARNING
This appliance Must be properly grounded, in accordance with all National, State and
local electrical codes.
DANGER
Any in-field modification made that bypass the safety features of this appliance will
result in serious injury or death.
WARNING
Any in-field modifications made without written authorization from AccuTemp
Products, Inc. will void all written and oral warranties.
INSTALLATION