Media Technology Systems ION8.8 User Manual
Page 13
Page 13 of 31
Aug‐09
Rack Mounting of ION4.4
: The MTS ION4.4 is provided with rack mount accessories
for either a single ION4.4 with a blank side plate, or as a pair of ION4.4’s in a 1U
package.
The
rack
ears
are
screwed
to
the
side
of
the
ION4.4
for
single
interface.
For
two
x
ION4.4
in
1U,
then
only
the
small
rack
ears
are
used
from
each
interface
(the
large
rack
ears
are
discarded)
and
the
connecting
plate
(with
the
MTS
logo)
is
used
to
link
the
front
panel
of
each
ION4.4.
See
Figure 3-2
below.
Figure 3-2: ION4.4 joined in the center to make a iU chassis
WallFloorCeiling Mounting of ION4.4
The MTS ION4.4 can be mounted inside a
ceiling cavity space, to a wall, inside a riser or under a table using the variety of
mounting
holes
and
hardware
combinations.
Although
Figure 3-3
(below)
shows
the
cable
management
conduit/trunking
located
away
from
the
rear
panel
of
the
ION4.4
(for
ease
of
understanding
the
mounting),
it
would
be
expected
that
the
cable
management
would
be
directly
adjacent
to
the
ION4.4
to
protect
cables
and
connectors.
Figure 3-3: Ceiling mounting of the ION4.4
For
other
applications
the
“rack
ears”
provided
can
be
oriented
to
allow
your
ION
4.4
to
be
fixed
to
a
wall,
cabinet
wall,
under
desk
or
variety
of
other
applications.
Figure 3-4
below
shows
a
typical
vertical
mounting
of
the
ION4.4
in
a
riser
or
cabinet.