AGFA 1815 Copier - Manual (Page 85)

Optional Equipment
5-5
Installing DIMM
Contact your dealer for information on purchasing DIMM that is best suited for use with this
machine. Insert DIMM into the socket as follows:
1 Turn off the machine, disconnect the power cord and disconnect the machine cable.
2 Remove the screw from the rear of the machine and
remove the side cover.
3 Remove DIMM, carefully pull end stoppers outwards,
then pull DIMM out of the socket.
4 Insert DIMM into the DIMM socket so that the notches
on DIMM align with the corresponding protrusions in
the socket.
5 When you have finished installing DIMM, replace the side cover and fasten it with the screw.