AGFA 1815 Copier - Manual (Page 38)

Preparations
3-6
Using the Face-up Tray
When copying and printing onto special paper, such as thick paper (90 to 163 g/m²), and
transparencies, always use the face-up tray. The face-up tray has a storage capacity of
approximately 30 sheets of standard paper (80 g/m²) but only 1 sheet of special paper should be
stored there at one time.
Note To avoid paper jam or damage to the machine, do not leave more than approximately 30 sheets of
standard paper or one sheet of special paper in the face-up tray.
1 Open the face-up tray (located at the rear of the
machine).
2 Perform the standard copying or printing procedure.
Finished copies or printouts will be output onto the
face-up tray.