AVE MV DR4000 - Manual (Page 74)

72
12.5 TCP/IP Configuration setting
Click Start Settings Control Panel Network .
Select TCP/IP , and then click Properties .
Before processing the DVR installation in a WAN, please make sure the Internet
connection works properly. If not, please contact your ISP provider.
If you are using a DHCP server, please select Obtain an IP address automatically . Any
assigned IP address for the connected DVRs must be in the same class type as the server. If
there is no DHCP server, please select specify an IP address and type in the IP address of
your PC. This IP address must be different from the DVR IP but in the same class type.
NOTE: The IP address of a DVR in a network must be unique to itself as opposed to
those of the other chosen PCs, but in the same class type