Bosch NETP666SUC - Manual (Page 16)

16
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
9 CAUTION
▯
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
▯
This function should not be used for long periods
of time, especially at high heat settings.
▯
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
1. Select the desired element and power level.
2. Touch the Timer key twice. The indicator for the
desired element lights up. r and min appear, and ‹‹
lights up on the Timer display.
3. Within the next 10 seconds, set the required time
using the number keys.
The timer begins to count down.
The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator ‹ appears in
the element display. ‹‹ lights up for 10 seconds on the
Timer display. The indicators disappear and the beep
stops.
Changing cook time
Select the element and touch the Timer key twice. Set
the new cook time using the number keys 0 to 9.
Cancelling cook time
Select the desired element and touch the Timer symbol
twice. The min, __ and r indicators light up. Then select
0 from the number keys until ‹‹ is displayed.
Timer function with AutoChef™
When you cook using AutoChef™, the programmed cook
time begins to count down once the selected element
reaches the set temperature.
Notes
▯
You can set a cook time of up to 99 minutes.
▯
To program a cook time of less than 10 minutes,
always select 0 first before you select the required
value.
▯
After a power outage, the timer function will be
cancelled.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the
$ indicator
of the required element lights up. Adjust the cook time
with touch keys 1 to 9 or deactivate with 0.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
1. Touch the Timer key. ‹‹ appears in the timer display.
The __, min and V indicators light up.
2. Set the required time using the number keys 0 to 9.
After a few seconds, the __ indicator goes out and the
programmed time starts to count down.
Once the time has elapsed
At the end of the programmed time, a beep will sound
and ‹‹ will appear on the timer display. The V indicator
is on. The display turns off after 10 seconds.
Changing the time
Touch the Timer key. The __ and
V indicators light up.
Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and
V indicators light up.
Touch the 0 key until ‹‹ appears on the timer display.
The V indicator goes out.
0O0GG 5JNFS
NJO
[
$MFBO-PDL
$IJME-PDL
1PXFS
4UBSU
,FFQ
8BSN 1SPHSBNT $IFG
"VUP
0O0GG 5JNFS
NJO
$MFBO-PDL
$IJME-PDL
1PXFS
4UBSU
,FFQ
8BSN 1SPHSBNT $IFG
"VUP