Innotech Genesis V4 System User Manual
Page 18
Installation Instructions for Innotech Genesis Systems
Edition 011100
2-4
Figure 2-4. Typical Local Expansion Module.
2-2.2.2.
Remote Expansion Modules.
The term: Remote Expansion Module
(REM) is the collective nomenclature applied to the several types of units used to configure
the hardware to the customer’s requirements. The REMs listed below are similar in
appearance and of the same approximate dimensions as the LEMs and perform the same
basic functions as the LEMs, but from a greater distance. However, REMs and LEMs
cannot be used together with the same Digital Controller or GENII MPC.
•
GENII AI REM Analogue Input Module
•
GENII AO REM Analogue Output Module
•
GENII DI REM Digital Input Module
•
GENII OPTO DI REM Opto-Isolated Digital Input Module
•
GENII DO REM Digital Output Module (Also called a Relay Output Module)
Figure 2-5 shows a typical REM; the example shown is GENII AI REM. REMs are DIN
Rail-mounted.
In addition to the types of REMs listed above and represented by Figure 2-5, there are three
additional types of REMs or REM-related modules described in the following paragraphs:
•
GENII RMI Remote Module Interface
•
GENII CS REM Control Station Module
•
GENII MP REM Multipoint Module
ALL DIMENSIONS ARE
IN MILLIMETRES
DIN Rail
Mounted
155
75
57
R
GENESIS II
DIGITAL INPUT MODULE