2.2 electrical inspection – Innotech Maxim User Manual
Page 45
Page 45
MAXIM Installation Instructions
© Mass Electronics Pty Ltd 2011
Chapter 5 – Commissioning
5-2.2 Electrical Inspection
The electrical inspection of the installation process involves verifying all electrical connections
are completed properly, and that there are no external voltages present on any of the inputs and
outputs. The subsequent sections provide detailed information to perform a thorough electrical
inspection of all wiring connections completed during the electrical installation process.
Before proceeding further with the electrical inspection, please check and verify the following items:
• Verify that all electrical power, including power to ancillary equipment is turned OFF.
• Verify all connections have been completed correctly with reference to the connection details
generated for your particular installation.
• Verify that all steel enclosures are properly earthed.
• Verify that all wiring is routed clear of high current or high voltage cables, and away from sources
that may cause electrical interference.
• Verify that all cables and wiring are free from physical damage.
Please ensure that the electrical installation process is completed in accordance with
. Refer to the Cabling Manual for more detailed information.
NOTE