Walker Magnetics SMART-D SERIES User Manual
Safety instructions, Operator's manual
OPERATOR'S MANUAL
AND
SAFETY INSTRUCTIONS
WITH INSTALLATION, TROUBLESHOOTING,
INSPECTION AND MAINTENANCE INSTRUCTIONS
SMART-D SERIES
Microprocessor Controlled
Chuck Control
O.S. WALKER
Rockdale Street, Worcester, MA 01606 (508)-853-3232 FAX (508)-852-8649
3508 Glenridge Drive, Chino Hills, CA 91709 (909)-597-4785 FAX (909)-597-0581
901 Arvin Avenue, Stoney Creek, Ontario, L8E5N9 Canada (905)-643-3338
In Canada: 1-800-267-4678 FAX (905)-643-6111
Email: [email protected]
Never attempt to operate this control until you have read
and understand this OPERATOR'S MANUAL
O.S. WALKER Co., Inc. SMART-D Control
SMART D MANUAL DD14511L Rev. L, March 30, 2011
Table of contents
Document Outline
- 1 INTRODUCTION
- 2 SAFETY INSTRUCTIONS
- 3 INSTALLATION INSTRUCTIONS
- 4 OPERATING INSTRUCTIONS
- 5 MAINTENANCE & TROUBLESHOOTING
- 5.1 Inspection & Maintenance
- 5.2 Having a Problem with your Chuck Control?
- 5.3 Chuck Control Connections
- 5.4 Remote Interface
- 5.5 Interface
- 5.6 Smart 75/100D Panel Layout
- 5.7 Smart 20/30/50D Panel Layout
- 5.8 Smart 7/10/15D Panel Layout
- 5.9 Smart 3/5D Panel Layout
- 5.10 Main PC Board
- 5.11 Smart 75/100D Wiring
- 5.12 Smart 20/30/50D Wiring
- 5.13 Smart 7/10/15D 115V Wiring
- 5.14 Smart 7/10/15D 200V Wiring
- 5.15 Smart 3/5D 115VDC Wiring
- 5.1 Smart 3/5D 230VDC Wiring
- 5.2 Enclosure Dimensions for SMART-D Controls
- 5.3 Remote Enclosure Dimensions
- 5.4 Remote Wiring Connections
- 5.5 Replacement Parts List
- 6 RETURN AND REPAIR INSTRUCTIONS