Hired-Hand Funnel Flow Fans: Metal Pit Transition Fan Combo Installation (24 Funnel Flow Fan) - Manual (Page 4)

HIRED-HAND MFG., INC. • 1733 County Road 68 • Bremen, Alabama 35033 · Phone 256-287-1000 • Fax 256-287-2000
Manual Part No. 4802-5251 Rev 7-07 Page 4 of 6
Attach the Transition Top to the
Transition Bottom using twenty-four ¼-20x½
Screw Caps (1004-5010) and Lock Nuts (1001-
3060). See Figure 7.
Assemble 24” FF Fan to the Transition Top by
sliding the top flap of the Fan under the Top Panel’s
flange; it should be pinch down tight underneath it. See
Figure 8.
STEP 5
Figure 7 – Attaching the
Transition Top to the Transition
Bottom
STEP 6
Figure 8 – Mounting
the 24" FF Fan
STEP 7
Attach the three Fan Brackets to
the Front Panel using #14x½ SS Screws.
The Fan Brackets should be inserted so that
the top parts of the brackets hold down the
flaps of the fan. Insert the bottom bracket
first to hold up the fan. Then attach the left
and right brackets to complete assembly of
the PTC. See Figure 9.
Figure 9 – Attaching
the Fan Brackets