4 vga monitor connection, Figure 2-32: usb device connection – IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 User Manual

Page 54

AFL-W19A/W19B/17D/W15A-N270 Panel PC

Page 42

Figure 2-32: USB Device Connection

Step 3:

Insert the device connector.

Once aligned, gently insert the USB device

connector into the onboard connector.

Step 0:

2.7.4 VGA Monitor Connection

The VGA output can be connected to an external VGA monitor. To connect the VGA

monitor to the AFL-W19A/W19B/17D/W15A-N270, please follow the instructions below.

Step 1:

Locate the female DB-15 connector

. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector

. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector

Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

AFL-W19A/W19B/17D/W15A-N270. See Figure 2-33.