2 serial device connection, Figure 2-30: lan connection – IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 User Manual

Page 52

AFL-W19A/W19B/17D/W15A-N270 Panel PC

Page 40

Step 1:

Locate the RJ-45 connector

on the bottom panel of the

AFL-W19A/W19B/17D/W15A-N270.

Step 2:

Align the connectors.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the bottom panel of the

AFL-W19A/W19B/17D/W15A-N270. See Figure 2-30..

Figure 2-30: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector.

Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 port.

Step 0:

2.7.2 Serial Device Connection

The serial device connectors are for connecting serial devices to the

AFL-W19A/W19B/17D/W15A-N270. Follow the steps below to connect a serial device to

the AFL-W19A/W19B/17D/W15A-N270 panel PC.

Step 1:

Locate the DB-9 connector

. The location of the DB-9 connector is shown in

Chapter 2

Step 2:

Insert the serial connector

Insert the DB-9 connector of a serial device into

the DB-9 connector on the bottom panel. See Figure 2-31.