IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 - Manual (Page 31)

AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 19
Description Label Type
CF card setup JCF1 2-pin header
Clear CMOS J_COMS1 3-pin header
COM1 Pin 9 setting JP6 6-pin header
COM3 Pin 9 setting JP7 6-pin header
COM3 RX RS-232/422/485 select JP8 8-pin header
COM3 TX RS-422/485 select JP11 6-pin header
COM3 RS-232/422/485 select JP10 12-pin header
Table 2-2: Jumpers
2.5.1 Access the Jumpers
To access the jumpers, please remove the back panel and the internal aluminum chassis.
2.5.2 Preconfigured Jumpers
WARNING:
Do not change the settings on the jumpers in described here. Doing so
may disable or damage the system.
The following jumpers are preconfigured for the AFL-W19A/W19B/17D/W15A-N270.
Users should no change these jumpers (Table 2-3).
Jumper Name Label Type
LVDS voltage selection J_VLVDS1 4-pin header
Touch Screen Select J1 4-pin header
Panel Type and Resolution J_LCD_TYPE1 8-pin header
Table 2-3: Preconfigured Jumpers