IEI Integration PPC-37xx-N270 v2.20 - Manual (Page 75)

PPC-37xx-N270 Panel PC
Page 61
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
PPC-37xx-N270. See Figure 4-37.
Figure 4-37: VGA Connector
Step 4: Secure the connector . Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.13 System Maintenance
If the components of the flat panel PC fail, they must be replaced. Please contact the
system reseller or vendor to purchase the replacement parts. Replacement instructions for
the above listed components are described below.
NOTE:
A user cannot replace a motherboard. If the motherboard fails it must
be shipped back to IEI to be replaced. Please contact the system
vendor, reseller or an IEI sales person directly.