4 cf card setup, Figure 4-15: at power select jumper location, Table 4-3: at power select jumper settings – IEI Integration PPC-37xx-N270 v2.20 User Manual

Page 55: Table 4-4: cf card setup jumper settings, See table 4-3, See figure 4-15, Table 4-3

PPC-37xx-N270 Panel PC

Page 41

AT Power Select

Description

Short 1 – 2

Use AT power

Default

Open Use

ATX

power

Table 4-3: AT Power Select Jumper Settings

The location of the AT Power Select jumper is shown in Figure 4-15 below.

Figure 4-15: AT Power Select Jumper Location

4.10.4 CF Card Setup

Jumper Label:

JCF1

Jumper Type:

2-pin header

Jumper Settings:

See Table 4-4

Jumper Location:

See Figure 4-16

The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave

device or the master device. CF Card Setup jumper settings are shown in Table 4-4.

CF Card Setup

Description

Open

Slave

Default

Closed Master

Table 4-4: CF Card Setup Jumper Settings